SMC / DMC Moulding Press – 100 Tons Capacity offered by us are made available in Pillar / Gate / H-Frame Type options and are manufactured as per customer’s given requirements. With capacity of 100 Tons, these find application in production of SMC / DMC / Bakelite / Urea / Melamine moulded parts. Further, these have Daylight of 820 mm, Stroke Length of 620 mm, Shut Height of 200 mm and Platen size of 600 x 600 mm that make these deliver efficient performance. These also come with Bottom transfer / Ejector Cylinder capacity of 5 Tons Temp. controller for mold.

These Hydraulic SMC Moulding Press are designed for achieving optimum production of simple as well as intricate molding of :

• Bakelite
• Melamine
• DMC/SMC

And this comes with the facility of ejection.Technical Specifications

The 250 tons SMC / DMC Moulding Press offered by us are used in the field of

• Hot moulding
• Hot forming
• Compression moulding

With capacity of 250 Tons, these are used in production of SMC / DMC / Bakelite / FRP / Urea / Melamine molded parts. These presses also feature heavy duty construction with inside tie rod design (As per JIS Grade). The machines also have daylight of 1000 mm, stroke length of 710 mm, shut height of 290 mm, platen size of 1000 x 1000 mm and electric motor of 20 H.P., 3 phase, ABB make to deliver efficient operations.

Features:

• Frame structure bearing good rigidity
• Adopting integrated system to deliver reliable performance, long service life and less leakage
• Ensuring easy replacement & maintenance Allowing breathing duration, curing time, temp. of platen, temp. variation range and others to be programmed in PLC

Technical Specifications

With a capacity of 60 tons, these 4 pillar type Hydraulic Presses find application in application areas involving pressing, trimming, press fit to remove bearing, riveting and others. With ram movement of down stroking type, these machines have daylight of 525 mm, stroke length of 460 mm, shut height of 65 mm, platen size of 570 mm x 330 mm (clear space) and Electric Motor support of 5 H.P., 3 Phase, 415 V, ABB Make.

These 4 Pillar Type Hydraulic Presses find application in field of

• Vertical injection molding
• Trans molding
• FRP & DMC molding
• Rubber molding

With operators accessing these presses from all three sides, the range is also suitable for deep drawing applications.Technical Specifications

These 1000 Tons SMC Moulding Presses are low noise hydraulic power pack units and come precision designed as per international standards. Featuring use of internationally make valves and other components, these presses find usage in sealing

• Heavy duty cylinders

The use of precision bushes with lubrication arrangement as well as honed carbon steel seamless tubes of international quality makes these machines deliver consistent performance. These machines come with Daylight of 1750 mm, Stroke Length of 1200 mm and Platen Size of 2300 mm x 2000 mm.

Features:

• Come with pressure keeping and time delaying function
• Working pressure and stroke can be adjusted according to technology requirement
• Easy to operate PLC computerized touch screen centralized control
• Provision of adjustment in manual and semi-automatic three operation modes

Technical Specifications

Overview We hold expertise in offering latest technology based range of Vacuum Laminating press that is ideal for molding applications where faster production as well as superior quality is required. Further, the vacuum chambers of machines pay off in terms of superior quality as well as reduced scrap parts.

Surrounding work piece with vacuum also helps in removing heated gases as well as trapped air, thus eliminating any possibility of defects. Its self-contained hydraulic system also features efficient:

• Load sensing
• Pressure compensated pump
• Hydraulic oil reservoir with sight gauge
• Thermometer

Vacuum Lamination Moulding Press Models

 

Vacuum Lamination Moulding Press-1

 

Vacuum Lamination Moulding Press-2

 

Vacuum Lamination Moulding Press-3

 

Vacuum Lamination Moulding Press-4

 

Application We have rich experience in offering latest technology based Vacuum Laminating presses. These find usage in molding applications that require faster production and superior finish quality. Further, vacuum chambers of machines also pay off in terms of high end quality and reduced scrap parts. Here, the presence of surrounding work piece with vacuum also assists in removing heated gases and trapped air, thus eliminating possibility of defects.

These Vacuum Laminating Molding Presses find application for production of:

• Printed Circuit Board
• Valve part
• Seals
• Other rubber and plastic moulded products

Santec's Vacuum Laminating press is ideal for molding applications where faster production & high quality is essential. The specially designed vacuum chambers of the machine pays off in the terms of higher quality and reduced scrap parts. Surrounding the workpiece with a vacuum removes heated gases and trapped air frame the part, eliminating the defects. Self-contained hydraulic system features on efficient load sensing, pressure compensated pump, hydraulic oil reservoir with sight gauge, thermometer and a clean-out door.