Basically our  machine consist of   4 – pillars Hydro pneumatic Press, Heat & Dust resistant  powder  coated Electrical panel cabinet . The  Press  is  built according to the International  norms  &  standards.

Also known as Hood Liner / Roof Lining Press/ Forming Press

We offer C-frame type presses that are designed to perform a variety of operations - where high force concentration is required in a relativity small area. C-Frame type presses are available in open back inclinable (OBI) and open-back stationery (OBS) designs. These presses have ample throat and open sides, which provide easy accesses to the die form three sides and permit loading/unloading of wide or irregular-shaped workpieces.

Basically our machine consist of a Fabricated ‘C’ frame type stress relieved structure, inbuilt Hydraulic power pack unit (Top of the Press). The machine is built according to the International Guidelines. They are delivered in 100% functional condition.In the following, please find further technical elements:

Basically our machine consist of Heavy Duty Fabricated – Frame type  press with, Upstroking ram movement. Frame platens are manufactured using ultrasonically tested steel plates welded together with vertical ribs to withstand the force. Whole platens are stress relieved after fabrication. The Main cylinder single acting type - 1no. are  mounted  at  the bottom  fixed platen, inbuilt  Hydraulic power pack unit  located  at the  right  or  back  side of the the  Press, Powder  coated electrical  control panel cabinet  with  all  reputed  make  eletricals   is  provided  at  the  right  side  of  the  press  .  The machine is  built according to the International Guidelines. They are delivered in 100% functional condition. 

The oil tank unit will be complete with suction strainer, air breather, oil level indicator, return line filters & Oil Cooling Unit etc.

Basically our machine consist of a Fabricated Two Columns  / H  - Frame  type press  with   stress  relieved  structure / frame   after  precision welding, inbuilt Hydraulic power pack unit (Top of the Press). The machine  is built according to the International Guidelines  to  achieve  high  geometrical  accuracies  &  safety  of  the  operator . They are delivered in 100% functional condition.

• Solid welded members
• Fabricated using steel uprights
• Whole structure is joined together with steel tie rods

• Automatic TypeAutomatic
• Capacity>100 Ton
• Type of PressC-Frame Press,H-Frame Press

Hydraulic Forging Press is widely used to form car wheels, bushings, gears, forged fittings like Tee, Elbow etc., using some common methods like hammer, press and die forging.

Basically our machine consist of  Heavy Duty  Fabricated – 4 Pillars type  press, Down stroking   ram  movement .  Frame platens   are  manufactured  using   ultrasonically  tested   steel  plates welded  together   with  vertical  ribs  to  withstand  the  force . Whole platens are stress relieved after fabrication. The Main cylinder single acting type – 06 Nos. & Double acting type 1 No.  jacking  cylinders  are  mounted  at  the top fixed platen for  fast  approach  &  fast  return  speed., inbuilt  Hydraulic power pack unit  located  at the top  side of the the  Press, Powder  coated electrical  control panel cabinet  with  all  reputed  make  eletricals   is  provided at  the  right  side  of  the  press. The machine is built according to the International Guidelines. They are delivered in 100% functional condition.