Santec Exim Private Limited
New Delhi, Delhi

GST 07AAHCS7908K1ZV
TrustSeal Verified

Compression Molding Presses

Hydraulic Compression Moulding Machine, 200 Tons

Rs 6,50,000 / Piece

Hydraulic Compression Moulding Machine, 200 Tons
  • Capacity: 200 Tons
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: Two
  • Heating of Platens: Electrical Heater
  • Motor Power: 20 HP
  • Capacity: 200 Tons
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: Two
  • Heating of Platens: Electrical Heater
  • Motor Power: 20 HP
  • Condition: New
  • Country of Origin: Made in India
Compression Moulding Presses are preferred by leading Industries across the globe be cause of unmatched features, high quality, heavy duty construction & performance of these Presses. 'SANTEC' manufacture these Presses with an uncompromising Quality attitude & providing outstanding services world wide. SANTEC Engineer's are Competent enough to accommodate customer's suggestions & design the presses meeting all requirements as per International standards. In these presses, the Ram / slide / moving platen moves in upward direction (from Bottom Home Position to upward position). We have standard models & make these presses as per customer's specifications & requirement too.

Different applications of the machine include the following :
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bekallite Moulding
  • Composite material / others polymers mouldings
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding
know more
Get Best PriceCall Now

600 x 600 mm Upstroking Compression Moulding Machine, 200 Tons

Rs 7,50,000 / Piece

600 x 600 mm Upstroking Compression Moulding Machine, 200 Tons
  • Capacity: 200 Tons
  • Platen Size: 600 x 600 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Electrical Heater
  • Minimum Order Quantity: 1 Piece
  • Capacity: 200 Tons
  • Platen Size: 600 x 600 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Electrical Heater
  • Stroke Length: 510 mm
  • Motor Power: 10 HP
  • Dimension: 2200 x 1000 x 2700 mm
  • Weight: 8 Tons
  • Condition: New
  • Shut Height: 190 mm
  • Heating Capacity: 6 kW/Platen
  • Country of Origin: Made in India
The 200 Tons capacity compression presses offered by us allow soft opening of moulds after curing period so as to ensure safety of moulded parts. Further, these feature use of rigid frames that are of heavy thickness to handle heavy loads as well as achieve frequent and fast operations. With all platens having parallel accuracy, the precise machining of structural members is done after normalizing so as to achieve parallelism between platen and bed as well as right angularity between bed and moving platen.

With capacity of 200 Tons, these have 4 pillars type up stroking ram movement with daylight of 700 mm and stroke length of 510 mm. These machines also feature shut height of 190 mm, platen size of 600 x 600 mm and Electric Motor used of 10 H.P., 3 Phase, ABB make so as to ensure consistent performance is delivered.

Technical Specifications
MakeSANTEC
OriginINDIA
StatusNew
Capacity200 Tons; 4 pillars type upstroking ram movement.
Daylight700 mm
Stroke Length510 mm
Shut Height190 mm
Platen size600 x 600 mm
Electric Motor10 H.P., 3 Phase, ABB make
Electrical heating load of the platens6 KW/Platen (Electrical Heating)
OperationOmron make touch type coloured screen.
Approx. dimensions2200 mm (L) x 1000 mm (W) x 2700 mm (H)
Weight of the press8 Tons (approx.)
know more
Get Best PriceCall Now

600 x 600 mm Hydraulic Compression Moulding Machine, 100 Tons

Rs 5,50,000 / Piece

600 x 600 mm Hydraulic Compression Moulding Machine, 100 Tons
  • Capacity: 100 Tons
  • Platen Size: 600 x 600 mm
  • Daylight Gap: 750 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • Heating of Platens: Electrical Heater
  • Capacity: 100 Tons
  • Platen Size: 600 x 600 mm
  • Daylight Gap: 750 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • Heating of Platens: Electrical Heater
  • Stroke Length: 550 mm
  • Motor Power: 10 HP
  • Condition: New
  • Country of Origin: Made in India

Today 'SANTEC' holds a consolidated leadership in the field of SMC/DMC/FRP Melamine Moulding Presses. SANTEC synonymous with “Better – Engineering” Now introduces these high speed presses which operate with high degree of precision & extremely safe to operate. The slide moves with 8 – Point gibs with lubrication arrangement special designed square gib construction provides accurate guiding of the moving platen / slide with extra stability to resist any deflection under different load conditions. The structure of the Press is monolithic in many models & pillars type presses are also manufactured depending on customer's requirements.

Different applications of the machine include the following :

  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bekallite Moulding
  • Composite material / others polymers mouldings
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding
know more
Get Best PriceCall Now

300 x 300 mm Laboratory Type Compression Moulding Machine, 30 Tons

Rs 7,50,000 / Piece

300 x 300 mm Laboratory Type Compression Moulding Machine, 30 Tons
  • Capacity: 30 Tons
  • Platen Size: 300 x 300 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Thermic Fluid or Oil
  • Minimum Order Quantity: 1 Piece
  • Capacity: 30 Tons
  • Platen Size: 300 x 300 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Thermic Fluid or Oil
  • Stroke Length: 300 mm
  • Motor Power: 5 HP
  • Condition: New
  • Control: PLC Controlled
  • Country of Origin: Made in India
  • Delivery Time: 2.5 Month
  • Packaging Details: Polythene packed or wooden box packed (based on customer requiremetns)
Santec presents a full range of compression molding presses from small lab and prototype units to fully-automated or multi-station systems. The advanced configuration of laboratory presses incorporate latest features required to test the various materials for Research & Development.

Features:
  • A specially designed heating system ensures a high uniformity of temperature of the plates. For this reason, the press is ideal for moulding rubber & plastic sheets or samples for laboratory tests.
  • Digital PID controllers - FUJI (Japan) / WEST Make provided for accurate temp. measurements.
  • Lab type compression molding presses can also be successfully used for moulding small series of rubber or plastic parts for mass production too.The structure is very rigid & can work in 3 shifts.
  • Covered from all three side except front side for loading & unloading of mould inside the press. Safety photo guard are placed on the front side for operator's safety.
  • 4-pillar type construction hence better alignment.
  • PLC with colored touch type display unit for user friendly operation.

Applications:
Santec's Laboratory Type Compression Molding Presses are widely used in following applications :
  • Engineering or Technical colleges to give training to the students.
  • Big Rubber Industries for R &D applications i.e. MRF, JK Tyres etc.
  • Composites Molding applications, Plastic Processors etc.
  • Laminates and Plastic cards manufacturing
know more
Get Best PriceCall Now

Downstroking SMC/DMC/FRP Compression Moulding Presses

Rs 75,00,000 / Unit

Downstroking SMC/DMC/FRP Compression Moulding Presses
  • Capacity: 300 Ton
  • Brand: SANTEC
  • Material: Mild Steel
  • Country of Origin: Made in India
  • Electric Motor: 10 hp
  • Voltage: 415 Volt
  • Minimum Order Quantity: 1 Unit
  • Capacity: 300 Ton
  • Brand: SANTEC
  • Material: Mild Steel
  • Country of Origin: Made in India
  • Electric Motor: 10 hp
  • Voltage: 415 Volt
  • Delivery Time: 2 Months
  • Packaging Details: Polythene packed or wooden box packed
Overview 'SANTEC' has with it leadership status in field of SMC/DMC/FRP Melamine Moulding Presses. Well recognized for their superior engineering standards, these high speed presses deliver high degree of precision in given applications. Further, these are also safe to operate. With slide moving with 8– Point Gibs with lubrication arrangement, the special design of square gibs provides accurate guiding of moving platen/slide. Further, thee also have extra stability for resisting any deflection under different load conditions.

Downstroking SMC/DMC/FRP Compression Moulding Presses Models

Application The down stroking SMC/DMC/FRP compression moulding presses offered by us feature use of latest engineering standards so as to achieve high speed in operations. These are also safe to operate and are made available with superior lubrication arrangement based slide moving with 8– Point Gibs. The designs of square gibs also help in providing desired stability towards resisting deflection under different load conditions and can provide desired flexibility in handling applications including:

  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bakelite Moulding
  • Composite material / others polymers moulding
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding
know more
Get Best PriceCall Now

400 x 400 mm Laboratory Type Compression Moulding Machine, 50 Tons

Rs 14,00,000 / Piece

400 x 400 mm Laboratory Type Compression Moulding Machine, 50 Tons
  • Capacity: 50 Tons
  • Platen Size: 400 x 400 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Electrical Heater
  • Capacity: 50 Tons
  • Platen Size: 400 x 400 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Electrical Heater
  • Stroke Length: 350 mm
  • Motor Power: 5 HP
  • Condition: New
  • Control: PLC Controlled
  • Country of Origin: Made in India
Santec presents a full range of compression molding presses from small lab and prototype units to fully-automated or multi-station systems. The advanced configuration of laboratory presses incorporate latest features required to test the various materials for Research & Development.

Features:
  • A specially designed heating system ensures a high uniformity of temperature of the plates. For this reason, the press is ideal for moulding rubber & plastic sheets or samples for laboratory tests.
  • Digital PID controllers - FUJI (Japan) / WEST Make provided for accurate temp. measurements.
  • Lab type compression molding presses can also be successfully used for moulding small series of rubber or plastic parts for mass production too.The structure is very rigid & can work in 3 shifts.
  • Covered from all three side except front side for loading & unloading of mould inside the press. Safety photo guard are placed on the front side for operator's safety.
  • 4-pillar type construction hence better alignment.
  • PLC with colored touch type display unit for user friendly operation.

Applications:
Santec's Laboratory Type Compression Molding Presses are widely used in following applications :
  • Engineering or Technical colleges to give training to the students.
  • Big Rubber Industries for R &D applications i.e. MRF, JK Tyres etc.
  • Composites Molding applications, Plastic Processors etc.
  • Laminates and Plastic cards manufacturing
know more
Get Best PriceCall Now

510 x 410 mm Upstroking Double Station Compression Moulding Machine, 225 Tons

Rs 8,00,000 / Piece

510 x 410 mm Upstroking Double Station Compression Moulding Machine, 225 Tons
  • Capacity: 225 Tons
  • Platen Size: 510 x 410 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Electrical Heater
  • Capacity: 225 Tons
  • Platen Size: 510 x 410 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Electrical Heater
  • Stroke Length: 225 mm
  • Motor Power: 7.5 HP
  • Weight: 9-10 Tons
  • Condition: New
  • Heating Capacity: 6 kW/Platen
  • Control: PLC Controlled
  • Country of Origin: Made in India
This Double station compression moulding hydraulic press find usage for thermoset plastics & rubber and are highly economical in operations because of advanced technology based hydraulic pump motors and electric panel support. With our expertise in offering these in custom built options, these can be delivered with down stroking or up stroking option with option of hydraulic or mechanical ejector. Further, the insulated mould platens also help in preventing undue heat transfers.

Made available in capacity of 225 Tons, these presses find application in molding rubber parts to make Toilet seat covers of Urea / thermosetting material.

Further, these feature 4 pillars type, up stroking ram movement as well as daylight of 300 mm, stroke of 225 mm, platen size of 510 mm (L) x 410 mm (W), heating load of 6 KW / Platen, total heating load of 24 KW and Electric Motor support of 7.5 H.P., 380 V.

Technical Specifications
MakeSANTEC
OriginINDIA
StatusNew
Capacity225 Tons
ApplicationTo mold rubber parts, to make toilet seat covers of Urea / thermosetting materials etc.
Type4 pillars type, up stroking ram movement
Daylight300 mm
Stroke225 mm
Platen size510 mm (L) x 410 mm (W)
Heating load6 KW / Platen
Total heating load24 KW
Electric Motor7.5 H.P., 380 V
OperationPLC Controlled (omron make) with display screen
Approx weight9 – 10 tons
know more
Get Best PriceCall Now

670 x 600 mm Upstroking Single Station Compression Moulding Machine, 325 Tons

Rs 7,50,000 / Piece

670 x 600 mm Upstroking Single Station Compression Moulding Machine, 325 Tons
  • Capacity: 325 Tons
  • Platen Size: 670 x 600 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Electrical Heater
  • Minimum Order Quantity: 1 Piece
  • Capacity: 325 Tons
  • Platen Size: 670 x 600 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Electrical Heater
  • Stroke Length: 250 mm
  • Motor Power: 15 HP
  • Dimension: 1500 x 1000 x 2200 mm
  • Weight: 12 Tons
  • Condition: New
  • Heating Capacity: 9 kW/Platen
  • Control: PLC Controlled
  • Country of Origin: Made in India
Made available in capacity of 325 tons with up stroking ram movement, these are 4 Pillars type presses. For delivering exceptional performance, these are made available with specifications of Daylight of 300 mm, Stroke of 250 mm, Platen size of 670 mm (L) x 600 mm (R), Heating load of 9 kw / platen and Electric Motor support of 15 H.P., 3 Phase, 415 Volts.

Features:
  • PID temp. controllers for each station
  • World class hydraulic and electric components
  • World class hydraulic seals for cylinders
  • Tonnage maintained by holding valves
  • When pressure drops, operator can restore the same by pressing push button

Technical Specifications:
MakeSANTEC
OriginINDIA
StatusNew
Capacity325 tons, up stroking ram movement
Type4 pillars type
Daylight300 mm
Stroke250 mm
Platen size670 mm (L) x 600 mm (R)
Heating load9 kw / platen
Total heating load18 kw
Electric Motor15 H.P., 3 Phase, 415 Volts
OperationPLC Controlled (Omron make) with display screen
Approx weight12 tons
Approx. dimension1500 mm (L) x 1000 mm (W) x 2200 mm (H)
know more
Get Best PriceCall Now

200 x 200 mm Laboratory Type Compression Moulding Machine, 10 Tons

Rs 10,00,000 / Piece

200 x 200 mm Laboratory Type Compression Moulding Machine, 10 Tons
  • Capacity: 10 Tons
  • Platen Size: 200 x 200 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Thermic Fluid or Oil
  • Capacity: 10 Tons
  • Platen Size: 200 x 200 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • No. of Daylight: One
  • Heating of Platens: Thermic Fluid or Oil
  • Stroke Length: 300 mm
  • Motor Power: 3 HP
  • Condition: New
  • Control: PLC Controlled
  • Country of Origin: Made in India
Santec presents a full range of compression molding presses from small lab and prototype units to fully-automated or multi-station systems. The advanced configuration of laboratory presses incorporate latest features required to test the various materials for Research & Development.

Features:
  • A specially designed heating system ensures a high uniformity of temperature of the plates. For this reason, the press is ideal for moulding rubber & plastic sheets or samples for laboratory tests.
  • Digital PID controllers - FUJI (Japan) / WEST Make provided for accurate temp. measurements.
  • Lab type compression molding presses can also be successfully used for moulding small series of rubber or plastic parts for mass production too.The structure is very rigid & can work in 3 shifts.
  • Covered from all three side except front side for loading & unloading of mould inside the press. Safety photo guard are placed on the front side for operator's safety.
  • 4-pillar type construction hence better alignment.
  • PLC with colored touch type display unit for user friendly operation.

Applications:
Santec's Laboratory Type Compression Molding Presses are widely used in following applications :
  • Engineering or Technical colleges to give training to the students.
  • Big Rubber Industries for R &D applications i.e. MRF, JK Tyres etc.
  • Composites Molding applications, Plastic Processors etc.
  • Laminates and Plastic cards manufacturing
know more
Get Best PriceCall Now

750 x 750 mm Hydraulic Compression Moulding Machine, 150 Tons

Rs 17,00,000 / Piece

750 x 750 mm Hydraulic Compression Moulding Machine, 150 Tons
  • Capacity: 150 Tons
  • Platen Size: 750 x 750 mm
  • Daylight Gap: 800 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • Heating of Platens: Electrical Heater
  • Capacity: 150 Tons
  • Platen Size: 750 x 750 mm
  • Daylight Gap: 800 mm
  • Machine Type: 4-Pillar Type
  • No. of Station: Single
  • Heating of Platens: Electrical Heater
  • Stroke Length: 600 mm
  • Motor Power: 15 HP
  • Condition: New
  • Country of Origin: Made in India
These are heavy duty construction & performance of these Presses. 'SANTEC' manufacture these Presses with an uncompromising Quality attitude & providing outstanding services world wide. SANTEC Engineer's are Competent enough to accommodate customer's suggestions & design the presses meeting all requirements as per International standards. In these presses, the Ram / slide / moving platen moves in upward direction (from Bottom Home Position to upward position). We have standard models & make these presses as per customer's specifications & requirement too.

Different applications of the machine include the following :
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bekallite Moulding
  • Composite material / others polymers mouldings
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding
know more
Get Best PriceCall Now

Explore More Categories

Hydraulic Presses

Hydraulic Presses

23 Products

Rubber Machinery

Rubber Machinery

8 Products

Transfer Moulding Presses

Transfer Moulding Presses

9 Products

Laboratorytype Compression Moulding Press

Laboratorytype Compression Moulding Press

6 Products

Smc Moulding Presses

Smc Moulding Presses

6 Products

Bladder Curing Presses

Bladder Curing Presses

5 Products

Hydraulic Straightening Press

Hydraulic Straightening Press

7 Products

Vacuum Lamination Moulding Press

Vacuum Lamination Moulding Press

6 Products

View Complete Range >
x

Send us a Quick Message

country flag
x

Provide Us More Details

Purpose of Requirement:

Reselling End Use Raw Material

We recommend you to enter details of your requirement to get quick quotations.
Back
company logo

Santec Exim Private Limited